Flowmeter Transferring Flow Measurements
Krohne brings a new option for its flowmeter portfolio: The new optionally available 'WIM' provides a 4...20mA electrical output signal for the company's variable area flowmeter VA40.
While the flow rate with these glass devices could previously be read only locally, the 4...20mA output option allows for transmission of the measured value for control or evaluation purposes. Krohne states. With VA40 WIM version the height of the float is converted into an electrical signal via a Hall sensor chain. This signal can be used for a PLC/DCS, or to record the measured value over a certain period with a data logger.
Along with each VA40 WIM, Krohne supplies the calibration curve, allowing the customer to assign the exact flow value to any current value. All connection variants of the VA40 are also available with the WIM option. With the robust stainless steel taps, the maintenance-free device is mounted directly into the pipeline using flange, screw, clamp or hose connections. An installation in hazardous areas according to ATEX II2G Ex ia IIC T6 Gb and ATEX II2D Ex ia IIIC T85°C Db is possible. Retrofitting the WIM option to existing devices is not possible. VA40 variable area flowmeters are used for the volume flow measurement of liquids or gases. The glass measuring tube enables visual inspection of the medium to evaluate properties such as gas entrainments or colouring.
This article is protected by copyright. You want to use it for your own purpose? Contact us at support.vogel.de (ID: 43222571)