Search

Whitepaper

Lifecycle Modeling

Services for Dynamic Simulation

Dynamic simulation can be used to test and validate compressor surge control systems to keep a large centrifugal compressor out of surge, especially during startup and shutdown.

Vendors

 

wp-logo
Many plant design parameters are based on transient operating conditions. Dynamic simulation accurately simulates transient events to predict the conditions that set equipment mechanical design temperatures and pressures.
These plants often have unforeseen process, control and relief problems. Dynamic simulation can be used as a process design tool to reveal these problems early in the design phase to avoid costly modifications during or after startup.
Test the control strategy as defined on a Process Flow Diagram (PFD) before the plant goes online to avoid costly troubleshooting and tuning efforts in the field. Compressor systems and complex fractionation systems are good examples.
Complex designs with tight heat integration may need supplemental heat for startup. Dynamic simulation can validate the process design to determine if adequate startup heat is available.

By clicking on "Download With Free Account" I agree that Vogel Communications Group transmits my data to the above mentioned provider of this offer and that he uses my data for the advertising of his product also by email and telephone. For this purpose he receives my address and contact data, as well as data to prove this consent, which he processes on his own responsibility.
You have the right to revoke this consent at any time with effect for the future. If the responsible recipient is located in a country outside the EU, we must inform you that the level of data protection may be lower than in the EU.

The provider of this whitepaper

INVENSYS Systems GmbH

Hermann-Klammt-Str. 1 -3
41460 Neuss
Deutschland

This download is provided to you by third parties (eg the manufacturer) or from our editorial staff free of charge.

Other whitepapers

services for
Lifecycle Modeling

Services for Dynamic Simulation

Dynamic simulation can be used to test and validate compressor surge control systems to keep a large centrifugal compressor out of surge, especially during startup and shutdown.

more...