How to Avoid Seal Contamination and Failures
Reliable Gas Supply Solutions for Process Gas Compressors
powered by: PROCESS - Chemie | Pharma | Verfahrenstechnik
This White Paper shows causes, consequences and analyses of Dry Gas Seal damages during operation and pressurized hold of process gas compressors.
Process gas centrifugal compressors are typically equipped with gas seals to prevent gas from escaping between the stationary compressor body and the rotating shaft. Compressors are normally shut down when high seal leakage occurs, indicating a seal failure. Experience shows that the major root cause for high gas leakage is the contamination of the seal. How can it be avoided?
By clicking on the button I agree that Vogel transmits my data to the above mentioned provider of this offer and that he uses my data for the advertising of his product also by email, telephone and fax. For this purpose he receives my address and contact data, as well as data to prove this consent, which he processes on his own responsibility.
You have the right to revoke this consent at any time with effect for the future.
If the responsible recipient is located in a country outside the EU, we must inform you that the level of data protection may be lower than in the EU.
Published: 07/04/2016 | PROCESS - Chemie | Pharma | Verfahrenstechnik