Logo
07.05.2019

PDF

Fertiliser from phosphorus-containing ashes - Waste-free process using fluidized bed spray granulation

More than 90% of the world's phosphorus reserves are outside Europe. Phos4green is a two-stage method that extracts phosphorus from sewage sludge ash and converts it into ready-to-use fertiliser granulates.

Logo
03.05.2019

PDF

PHOS4green: recovery technology that releases phosphate from sewage sludge ashes and converts it into ready-to-use fertilizers

Two-step process: To initiate the conversion reaction, a suspension is produced from the phosphate-containing ash using a mineral acid and (optional) water. The ensuing fluid bed granulation process converts the digested phosphate into directly usable fertilizer granulates.

Logo
02.05.2019

PDF

The potential of fluid bed systemes for the production of speciality fertilizers

From improving durability and flowability through dust reduction to a pronounced depot effect or a targeted nutrient supply via better active ingredient distribution, fluidised bed technology can deliver many benefits.

Logo
29.04.2019

Events

Meet the Glatt Experts @ Dispersion Days 2019 in Selb

20.05.2019 um 18:00 Uhr - 22.05.2019 um 17:00 Uhr

Event location: Selb, Germany

On-demand solutions in paint development are within reach with APPtec®, a new process for spray calcination in pulsed hot gas flows. Precisely adjustable particle size spectrum, functionalization for improved dispersion, ...

read...
Logo
14.04.2019

Events

Meet the Glatt Experts @ the DKG Keramikertagung 2019

05.05.2019 - 09.05.2019

Event location: Montanuniversity Leoben, Austira

Dr. Thomas Jähnert, Sales Manager Advanced Powder Processing at Glatt Ingenieurtechnik Weimar, will give a lecture on "APPtec® - a new generation of spray pyrolysis to produce advanced powders".

read...
Logo
09.04.2019

PDF

Pioneering Process for Groundbreaking Particle Synthesis

With APPtec®, primary particles can be provided with an almost freely adjustable chemical and mineralogical composition and previously unattained properties. Time-consuming and risky scale-up procedures are eliminated because of the size-independent conditions.

Logo
08.04.2019

News

Glatt will present small fluid bed system for large agglomeration requirements

Compact, fast, economical: Glatt's new plant system starts continuous production of added-value ingredients after an installation time of just 12 days.

read...
Logo
08.04.2019

Events

Meet the Glatt Experts @ Vitafoods 2019 Stand D.133

07.05.2019 - 09.05.2019

Event location: Palexpo, Geneva, Switzerland

Enhanced ingredients. Fluid bed and spouted bed technology for dust-free granules with improved and defined particle properties.

read...
Logo
07.03.2019

Article

How Powder Handling Can Profit From Modular Plant Concepts

Transferring fine powders and powder mixtures into uniformly porous, practically dust-free, soluble and meterable granulates is what Glatt's new GF Modflex plant concept achieves in an endless loop with consistently top quality and safety.

read...
Logo
21.02.2019

News

Novel Glatt Process Technologies @ Powtech 2019

Glatt launches phosphorus recovery system and compact fluidised bed agglomeration solution. "PHOS4green" converts sewage sludge ashes into high-quality fertilisers and "GF ModFlex" offers continuous production after just 12 days for installation.

read...
Logo
21.02.2019

Events

Meet the Glatt Experts @ Powtech 2019 Hall 3 / 3-249

09.04.2019 - 11.04.2019

Event location: Nuremberg, Germany

Glatt launches phosphorus recovery system "PHOS4green", the compact fluidized bed agglomeration solution "GF ModFlex" and "ProAPP® Lab", the laboratory unit for continuous spray pyrolysis in a pulsed hot gas stream.

read...
Logo
20.02.2019

Events

Meet the Glatt Experts @ Batterietagung 2019

02.04.2019 um 10:00 Uhr - 04.04.2019 um 17:00 Uhr

Event location: Aachen, Germany

Benefit from high-performance powders produced with Glatt APPtec® to improve active materials for batteries and solid electrolytes. All particles are treated identically regarding to temperature and retention time as a basis for homogeneous NMC, LNMO, LLZO or modified graphite.

read...
Logo
18.02.2019

PDF

The modularisation of chemical API synthesis

The modularisation of chemical synthesis pathways in pharmaceutical production can improve overall plant efficiency and reduce planning time. Glatt has optimised the API synthesis process and developed bespoke plant designs for several international customers.

Logo
12.02.2019

Events

Meet the Glatt Experts @ European Coatings Show Hall 4 / Booth 135

19.03.2019 - 21.03.2019

Event location: Nuremberg, Germany

Are you looking for possibilities to produce powders that meet your specific requirements? Do you want to influence the surface structure and functionality of your particles?

read...
Logo
15.01.2019

Events

PCH Meetings - 15th International business convention for Pharmaceutical, Chemical and Petro-chemical industries

20.03.2019 um 10:00 Uhr - 21.03.2019 um 13:00 Uhr

Event location: Double Mixte, Lyon, France

Meet the Glatt Experts! Take the chance and discuss your ideas about innovative particle design with fluid bed and spouted bed technologies. Learn more about enhancing the functions of food, feed, chemical, and fine chemical ingredients.

read...
Logo
07.01.2019

Events

28th ATC 2019: Industrial Inorganic Chemistry - Materials and Processes

21.02.2019 um 09:00 Uhr - 22.02.2019 um 13:00 Uhr

Event location: DECHEMA-House · Frankfurt am Main · Germany

Meet the Glatt Experts during the Poster Party, presented by Dr. Thomas Jähnert from Glatt Process Technology Food, Feed & Fine Chemicals. Learn more about APPtec – a new generation of spray pyrolysis technology to produce advanced materials.

read...
Logo
19.12.2018

Events

Arab Health 2019 - Meet the Glatt Experts @ Booth Z3.J30

28.01.2019 um 09:00 Uhr - 31.12.2018 um 17:00 Uhr

Event location: Dubai World Trade Center

Processes. Plants. Complete production sites. Extension/modification of existing and the construction of new production facilities - in parts or completely.

read...
Logo
10.12.2018

PDF

Added-Value Ingredients for Better Products

The properties of functional ingredients can be fine-tuned using fluidised bed spray granulation, agglomeration, microencapsulation and coating. Plant manufacturer Glatt Ingenieurtechnik offer a new compact spray agglomeration concept for industrial-scale continuous production.

Logo
05.12.2018

Events

CPhI & P-MEC India - Meet the Glatt experts at hall 9 booth A03 SS 3

12.12.2018 - 14.12.2018

Event location: India Expo Center, Greater Noida, Delhi NCR

Glatt Process & Plant Engineering: We combine professional engineering with in-depth technology expertise. Benefit from reliable solutions from one single source for your investment projects in pharmaceutical, biotech, food, feed and fine chemical industries.

read...
Logo
16.11.2018

PDF

FROM HOT GAS STREAM TO MATT FINISH

Thanks to a novel method of spray calcination, test-ready additives for rapid market entry can be ready in just a few weeks. By Lars Leidolph, Glatt Ingenieurtechnik, and Andreas Kröger, Pigmentsolution.

Logo
04.11.2018

Events

Meet the Glatt experts @ HiE Europe in hall 8, booth P130

27.11.2018 um 09:00 Uhr - 29.11.2018 um 17:00 Uhr

Event location: Messe Frankfurt/Main

Glatt Ingenieurtechnik will introduce a new compact continuous spray agglomeration system that can be up and running in just 12 days

read...
Logo
21.06.2018

PDF

Optimizing End Products with Finely Tuned Process Parameters

Microcapsules provide an excellent way to extend the shelf-lives of essential oils, vitamins, flavours and many other active ingredients, and protect them from external influences. A key consideration is process optimization to enahnce the ingredients and their release profiles.

Logo
15.06.2018

Glatt. Webinar

Logo
12.06.2018

PDF

Glatt GF ModFlex - Continuous Fluid Bed Spray Agglomeration

Based on proven fluidized bed technology Glatt offers a newly developed compact, flexible and modular plant concept for reduced investment costs, reduced operation costs, minimum space requirements, maximum flexibility, fast installation by plug & play, and safe operation.

Logo
11.06.2018

PDF

Glatt ProCell LabSystem for Particel Design and Particle Engineering

The laboratory unit is designed for testing of spouted bed and fluid bed processes in the single kg-scale: » Spray granulation: granules and pellets from liquids » Spray agglomeration: granules from powder » Spray coating: coating of particles with liquids » and other process...

Logo
01.06.2018

Events

GLATT APPTEC POWDER SYNTHESIS @ ICIM 2018

18.06.2018 - 22.06.2018

Event location: Dresden, Germany

15th International Conference on Inorganic Membranes: Dr.Lars Leidolph, Glatt Ingenieurtechnik GmbH presents APPtec as a new method to produce innovate powder materials with unique functionalities for inorganic membranes and specialized ceramics.

read...
Logo
29.05.2018

Article

Compact Continuous Agglomeration and Next-generation Control Systems

Glatt presents several new developments, including a compact system for continuous agglomeration and a modular control system that is easy to customize.

read...
Logo
29.05.2018

Events

ACHEMA Congress 2018: Modular Plant Concepts for Biotechnological and Pharmaceutical Production

12.06.2018 von 16:30 Uhr - 17:00 Uhr

Event location: Messe Frankfurt, Frankfurt/Main, Germany

Dirk Steinhäuser and Jan Kirchhof, Glatt Process & Plant Engineering, Glatt Ingeneiurtechnik, Germany, will give a lecture at the ACHEMA Congress 2018 on "Modular Plant Concepts for Biotechnological and Pharmaceutical Production – Case Study with comparison of Project Examples"

read...
Logo
04.05.2018

Events

ACHEMA 2018: Glatt GF ModFlex – compact production design for continuous spray agglomeration for food and feed ingredients

11.06.2018 um 09:00 Uhr - 15.06.2018 um 17:00 Uhr

Event location: Messe Frankfurt, Frankfurt/Main, Germany

Based on proven fluidized bed technology Glatt offers the newly developed compact, flexible and modular plant concept Glatt GF ModFlex for continuous spray agglomeration for food and feed ingredients.

read...
Logo
03.05.2018

Article

How to Move Smoothly and Quickly into Asian Markets

Biopharmaceutical companies looking to manufacture in the Middle East or India may find they can’t simply transfer the plant they’ve been using successfully in Europe, for logistic as well as regulatory reasons. An expert in integrated process technology and engineering, Glatt In...

read...
Logo
23.04.2018

PDF

How to safely stabilise vitamins and probiotics

Sensitive substances such as probiotics, vitamins or sustained release dosage forms must be furnished with a functionally protective coating to ensure their safe transport through the intestinal tract. Hot-melt fluid bed granulation provides possibilities for product design.

Logo
07.03.2018

PDF

A fluid bed approach to produce urea-based fertilizers

Mike Waskow, Glatt Ingenieurtechnik, Germany, explains how economical production of urea-based fertilizers can be achieved using fluidized bed technology.

Logo
18.02.2018

PDF

Glatt Ingenieurtechnik: Your Partner for Process and Plant Engineering offering Technology From a Single Source

We focus on processes involving particle design and particle engineering for the development, optimization, functionalization, and production of bulk materials, such as powders, granules, and pellets for food, animal feed, fine chemicals, pharmaceutical industry and biotechnology

Logo
02.02.2018

Article

Compact Continuous Agglomeration and Next-generation Control Systems

At Achema, Glatt will showcase several new developments, including a compact system for continuous agglomeration and a modular control system that is easy to customize.

read...
Logo
07.12.2017

Article

How to Ensure Functions and Protect Valuable Ingredients

The SEPAWA congress has become a central event for the detergents/cleansers, cosmetics and perfume industries. The plant manufacturer Glatt Ingenieurtechnik presented solutions for processing, protecting and refining cleansing substances, stabilizers, enzymes, polymers, scent, fl...

read...
Logo
27.10.2017

News

Satisfied participants in the 3-day workshop on particle engineering

TTC-Workshop "From Nano to Macro" zum Thema Engineering across the lenght scale. The possibilities for particle design and particle engineering using fluidized bed processes generated intensive and interesting discussions.

read...
Logo
19.10.2017

PDF

Glatt Technology Center Weimar

Unique platform for particle design and engineering for developers, manufacturers, and scientists. We provide technologies like APPtec powder synthesis, fluidized bed, and spouted bed for the advanced generation of powder and the manufacturing/optimization of granules + pellets.

Logo
18.10.2017

PDF

New options in product design for high performance detergent applications

Surfactants and bleaching agents are used for targeted effect on organic substances. Glatt fluidized bed and spouted betechnologies are usable to add value or improve product properties of dry detergent formulations. Liquids or powders can be processed to innovative products.