Logo
16.01.2019

Article

Measuring CO2 Gas in Enhanced Oil Recovery Operations

Petroleum engineers responsible for enhanced oil recovery (EOR) operations will find the ST100 Series Thermal Flow Meter from Fluid Components International (FCI) provide precision CO2 gas mass flow measurement in a highly reliable and fully Hazex agency approved no-moving parts ...

read...
Logo
26.10.2017

Article

Precise Measurement in Harsh Conditions

Engineers who need accurate measurement of gases or liquids in smaller pipe sizes will find instruments from Fluid Components International (FCI) helpful. Using thermal dispersion flow measurement with no-moving parts, the ST75 Series and ST100L Air/Gas Flow Meters and FLT93L Flo...

read...
Logo
23.06.2017

Article

Air/Gas Flow Meters for Large Diameter Pipes, Stacks and Ducts

Process and plant engineers in heavy industrial facilities responsible for optimizing combustion or pre-heated air to large boilers, stack emissions monitoring and reporting, or flue gas/scrubber balancing, will find the next-gen MT100 Series Multipoint Thermal Mass Flow Meters s...

read...
Logo
22.03.2017

Article

Avoid Costly Pump Repairs, Reduce Maintenance and Extend Life

Engineers responsible for municipal or industrial water storage, disinfection or effluent treatment systems will find the FlexSwitch® FLT93 Flow Switch from Fluid Components International (FCI) reduces pump repair and extends pump life by detecting dry running conditions.

read...
Logo
06.11.2016

Article

Regional Support for Customers in the Middle East

Fluid Components International (FCI) announces the establishment of Fluid Components Saudi Arabia, a joint venture with GAS Arabian Services.

read...
Logo
12.09.2016

Article

Thermal Flow Meter Line Now With Hart Bus Communication

FCI’s compact thermal flow meter line has been expanded and improved with an all new, advanced electronics design that features the addition of Hart, Version 7, digital bus communication and more.

read...
Logo
16.03.2016

Article

Solar Powered Flow Meters Provide Flare Gas Measurement for Remote Fracking Sites

Engineers responsible for oil/gas production at remote field sites that lack easy access to electric power will find constant power technology thermal mass flow meters from Fluid Components International (FCI) can provide a solution to their gas flow metering needs.

read...
Logo
04.06.2015

News

FCI Installs 20 Spent Fuel Pool Level Instruments At 6 Chinese Plants To Meet Post-Fukishima Monitoring Regulations

FCI has successfully installed 20 of its rugged Model CL86 Plus Spent Fuel Pool Level Instruments (SFPLI) in 6 different plants located throughout China.

read...
Logo
21.05.2015

News

Thermal Mass Flow Meter Takes The Heat To Measure Hot Dirty Flue Gas In Large Ducts

As a reliable solution to flow measurement problems in large ducts with hot dirty gases, the rugged MT91 Series Flow Meter from Fluid Components International (FCI) takes the heat and provides precise, repeatable measurement to meet stringent environmental regulations.

read...
Logo
01.05.2015

News

FCI FLT93 FlexSwitch Provides Reliable Flow or Leak Detection In Nuclear Power Plants

Engineers searching for a precision flow/level/temperature switch for use in liquid, air, gas or for interface service will find the FLT93 Series FlexSwitch® from Fluid Components International (FCI) provides a highly reliable solution in a wide range of applications.

read...
Logo
10.04.2015

Article

Precise Flow Measurement with On-Site Calibration

The new ST100 Series Thermal Mass Flow Meter from Fluid Components International (FCI) with FCI’s Verical In-Situ Calibration Verification System combines precise air/gas measurement capability with the convenience of in-situ calibration verification.

read...
Logo
02.04.2015

Products

FS10A Analyzer Flow Switch/Monitor

The FS10A is a universal flow monitor and switch specifically designed for gas and liquid process analyzer sampling systems. The FS10A is a fast responding, highly repeatable sensor which installs easily into a standard tube tee fitting or new SP76 (NeSSI) modular manifold. Th...

read...
Logo
02.04.2015

Products

FCI ST100 Series Thermal Mass Flow Meters

With FCI’s new ST100 Series, the science of process gas flow metering has never been so advanced or so future-ready! ST100 is an all-new thermal dispersion technology gas flow meter that combines feature- and function-rich electronics with the industry’s most advanced flow sen...

read...
Logo
02.04.2015

Products

FCI FLT93 Series FlexSwitch

FLT93s are found in continuous operation in the most demanding and critical process and plant applications. You will find FLT93 the most preferred solution in oil and gas upstream and downstream applications; wastewater treatment; chemical operations; power plants, including n...

read...
Logo
02.04.2015

Events

ACHEMA – World Forum and 31

15.06.2015 - 19.06.2015

Event location: Frankfurt Am Main in Frankfurt, Germany

Join us at Booth 11, Hall A38 at ACHEMA, where the focus is on BiobasedWorld, Innovative Process Analytical Technology (PAT) and Industrial Water Management. Discover more about the process industry including energy efficiency, materials and materials testing, and safety techn...

read...
Logo
02.04.2015

Events

AHS Intl Form 71

05.05.2015 - 07.05.2015

Event location: Virgina Beach Convention Center in Virgina Beach, VA

Join us at Booth 111 for the AHS International's 71st Annual Forum and Technology Display. This event is one of is the world's leading international technical event on vertical flight technology. The three-day meeting will include more than 230 technical papers, and more than ...

read...
Logo
02.04.2015

Events

Offshore Technology Conference (OTC)

04.05.2015 - 07.04.2015

Event location: Reliant Park in Houston, Tx

Join us at Booth 11500 at the Offshore Technology Conference (OTC). OTC is where energy professionals meet to exchange ideas and opinions to advance scientific and technical knowledge for offshore resources and environmental matters. Founded in 1969, OTC’s flagship conference ...

read...
Logo
02.04.2015

Events

ISA Analytical Division (AD) Symposium

27.04.2015 - 01.05.2015

Event location: Hilton Galveston Island Resort in Galveston, TX

You don't want to miss the 60th Analysis Division Spring Symposium at the Galveston Island Conference Center. Registration for the Analysis Division Conference, training courses, and banquet is carried out through our parent organization at ISA.ORG. You can register online by ...

read...
Logo
02.04.2015

PDF

FCI ST100 Series Thermal Mass Flow Meters

The ST100 Series is a thermal dispersion technology gas flow meter that combines feature- and function-rich electronics with the industry’s most advanced flow sensors to achieve a truly state-of-the-science flow metering solution.

Logo
02.04.2015

PDF

FCI Green Energy Applications Guide

Our Green Energy Applications Guide describes several applications where FCI flow meters, flow switches and level switches are typically installed. Our products can help optimize process performance, measure and report for regulatory agency compliance, and more.

Logo
01.04.2015

PDF

FCI Best Practices Engineering Guide

Download this guide to learn more about recommended engineering practices with diagrams and specifications for straight-run, installation orientation and depths, as well as use of flow conditioners as an engineering solution for FCI single-point, thermal dispersion flow meters.

Logo
01.04.2015

PDF

Flow Switch Guide: FLT93 Series

Learn more about our FLT93 Series with this flow switch guide. The FLT93 Series flow switches are found in continuous operation in the most demanding and critical process and plant applications.

Logo
01.04.2015

PDF

Flare Meter Guide

Download our Flare Meter Guide to learn more about our flare flow meters. Our flow meters provide plant operations with a tool to signal abnormal process changes, early leak detection, and report on flared gases to comply with environmental agency reporting.

Logo
01.04.2015

PDF

FCI Flow Calibration Services Brochure

Download our FCI Flow Calibration Services Brochure to learn more about our state-of-the-art flow calibration laboratory. Our lab has the versatility to quickly transition through a wide range of calibration fluids, line sizes, and process connections.

Logo
01.04.2015

PDF

Field Service Brochure and Order Guide

Download our Field Service Brochure to find out more about FCI’s worldwide customer support team. Our team has the product, application and installation engineering expertise to support site staff with timely, quick and accurate on-site field support.

Logo
01.04.2015

PDF

FCI Product Line Brochure

Download our FCI Product Line Brochure to learn more about our products and patented thermal dispersion flow measurement technologies.

Logo
31.03.2015

News

FCI AS-FT Flow Transmitter For Mission-Critical Aircraft Monitoring Applications

The AS-FT Flow Transmitter from FCI Aerospace features a rugged, highly reliable thermal dispersion technology sensor design that is ideal for mission-critical air, gas and fluid monitoring systems on commercial and military aircraft.

read...
Logo
30.03.2015

News

Highly Accurate ST98 Flow Meter Reduces Plant HVAC Boiler Fuel Consumption & Costs

Precise Flow Monitoring Also Reduces Plant HVAC Emissions—Plant engineers will want to learn more about the advanced ST98 Air/Gas Flow Meter from Fluid Components International (FCI), which is ideal for optimizing the fuel-to-air ratio for boiler control.

read...
Logo
24.03.2015

News

FCI Thermal Mass ST100L Air/Gas Flow Meter For Municipal Water Disinfection

FCI's Model ST100L Air/Gas In-Line Thermal Mass Flow Meter with Vortab® Flow Conditioner from Fluid Components International (FCI) provides accurate flow measurement without the long straight pipe runs required by other meters.

read...
Logo
26.02.2015

Article

Receives FM Div 1/Zone 1 Approval

The FS10A Analyzer Flow Switch/Monitor from Fluid Components International (FCI) has received FM Div 1/Zone 1 Approval on all remote probe configurations.

read...
Logo
31.10.2014

Article

In Aeration Basins

Fluid Components International’s ST100 thermal massflow meter was designed for application in aeration basins.

read...
Logo
30.06.2014

Article

Effective, Economical Nitrogen Tank Blanketing

Process engineers in search of a flow measurement solution to support accurate, safe and economical nitrogen tank blanketing operations will find the ST Series Family of Flow Meters from Fluid Components International (FCI) provides a wide range of choices designed to accommodate...

read...
Logo
20.08.2013

Article

New Mass Flow Meter with Dual Averaging Offers Higher Accuracy for Large Pipes and Ducts

The new ST102A Air/Gas Thermal Mass Flow Meter from Fluid Components International (FCI) features an advanced dual-element averaging system, improving installation repeatability and accuracy for larger diameter pipes and ducts.

read...
Logo
27.03.2013

Article

Measuring Gas Flow in Hazardous Areas

Fluid Components International's (FCI) ST100 Series Thermal Mass Air/Gas Flow Meter is now ATEX and IECEx approved, assuring safe operation in potentially hazardous environments.

read...
Logo
09.11.2012

Article

Measurement Solutions for Professionals

With helpful case studies, applications notes and best practices information, the new FCI Flow/Level Measurement Product and Services Catalog CD Release 13.0 from Fluid Components International (FCI) provides a wide range of instrument solutions that help to increase process prod...

read...
Logo
02.10.2012

Article

Without Reliable Sampling, Sophisticated Fluid Analyzers Are a Waste of Money

No matter how sophisticated a fluid analyzer system may be, it will be ineffective if a sample flow fails to reach the analyzer sensor or if the sample is contaminated or stale. Failing to monitor fluid flow to the analyzer may result in unsaleable product or environmental harm. ...

read...
Logo
24.08.2012

Article

FCI ST100 Air/Gas Flow Meter

The ST100 Series Flow Meter combines flow sensing performance with feature- and function-rich electronics. The ST100 features a plug-in card replacement that can be changed out by technicians in the field to adapt to a plant’s changing network communication needs.

read...