Process engineers in search of a flow measurement solution to support accurate, safe and economical nitrogen tank blanketing operations will find the ST Series Family of Flow Meters from Fluid Components International (FCI) provides a wide range of choices designed to accommodate various tank and line sizes.
The new ST102A Air/Gas Thermal Mass Flow Meter from Fluid Components International (FCI) features an advanced dual-element averaging system, improving installation repeatability and accuracy for larger diameter pipes and ducts.
With helpful case studies, applications notes and best practices information, the new FCI Flow/Level Measurement Product and Services Catalog CD Release 13.0 from Fluid Components International (FCI) provides a wide range of instrument solutions that help to increase process productivity and lower operating costs.
No matter how sophisticated a fluid analyzer system may be, it will be ineffective if a sample flow fails to reach the analyzer sensor or if the sample is contaminated or stale. Failing to monitor fluid flow to the analyzer may result in unsaleable product or environmental harm. The costs of analyzer failure are potentially huge in terms of lost production, damage to equipment, regulatory fines, liability and more. This article gives guidelines for choosing a flow monitoring system.
The ST100 Series Flow Meter combines flow sensing performance with feature- and function-rich electronics. The ST100 features a plug-in card replacement that can be changed out by technicians in the field to adapt to a plant’s changing network communication needs.
Fluid Components International (FCI) presents its ST100 Series Thermal Mass Air/Gas Flow Meter in a remote mountable configuration, well suited for applications in hazardous areas or hard-to-reach locations.
Fluid Components International (FCI) has launched the new ST100 series of continuous thermal mass flow meters. The devices are able to measure gas mass flow rates, total flow, temperature and pressure depending on the model family.
The MT91 multi-point gas flowmeter from Fluid Components International (FCI), which is especially suited to monitoring combustion plants, is now certified as complying with European standards EN 15267-1: 2009, EN 15267-2: 2009, EN 15267-3: 2007 and EN 14181: 2004.
According to the manufacturer, Fluid Components International (FCI), its new VeriCal In-Situ Calibration Verification System for gas and flare flow meters allows technicians to confirm flow measurement accuracy in only minutes, saving time and lowering operating costs in flare gas applications aboard offshore platforms and land based oil and gas, and chemical plants.