Germany: New Process Covestro and Partners to Start Further Project for Plastics with CO2

Editor: Dr. Jörg Kempf

A new project by Covestro shows: Carbon dioxide is being used ever more widely as a novel raw material in plastics production. Together with partners the materials manufacturer is working on a new climate-friendly process to produce elastomers.

Related Companies

Thanks to research carried out by Covestro and its partners, carbon dioxide can already be used in the production of polyurethane flexible foam.
Thanks to research carried out by Covestro and its partners, carbon dioxide can already be used in the production of polyurethane flexible foam.
(Picture: Covestro)

Leverkusen/Germany – As part of the “Production Dreams” project, Covestro is working with RWTH Aachen University and the Technical University of Berlin, both in Germany, on a further process that will enable the greenhouse gas to be used as well in the environmentally friendly manufacture of elastomers on an industrial scale.

The German Federal Ministry of Education and Research (BMBF) is providing funding for the project of up to €1.5 million over the next three years as part of the “r+Impuls – Impulse für industrielle Ressourceneffizienz” (r+Impulse –impetus for industrial resource efficiency) measure under the “Research for Sustainable Development” (FONA³) framework program.

Around 25 Percent of Oil Can Be Replaced with CO2

Elastomers are normally made entirely from petroleum. Now, some 25 percent of the oil used to manufacture a precursor can be replaced with CO2. The resulting polyether carbonate polyurethane can be processed into elastomers.

Individual batches of the innovative material have already been manufactured in the lab. The focus is now on developing a continuous process that will support cost-effective production on an industrial scale.

“By participating in the BMBF Production Dreams collaboration, we are redoubling our efforts to develop cost-effective and climate-friendly production processes that use CO2 as an element in high-performance plastics,” says project manager Dr. Jochen Norwig, who works in catalysis research at Covestro in Leverkusen.

Significantly Better Ecological Credentials

Small-scale tests have so far shown that elastomers manufactured using this process exhibit the same impressive qualities as those produced using only petrochemical raw materials. At the same time, the new process that the project partners want to develop and put into practice is much more energy-efficient and uses a much lower quantity of solvents. It therefore has significantly better ecological credentials than conventional processes. Using less petroleum also means fewer processing steps have to be carried out before it can be used in the elastomer, which in turn reduces the overall CO2 emissions and energy consumption associated with the process.

Using CO2 thus conserves petroleum, which is a finite resource, and expands the base of raw materials used in the chemical and plastics industries. The number of plastics that can be produced using CO2 is also growing.

Thanks to research carried out by Covestro and its partners, carbon dioxide can already be used in the production of polyurethane flexible foam. Covestro is aiming to open the first production facility this year at the Dormagen site, where it will manufacture a polyol with a 20 percent CO2 content as a precursor. This precursor will be used primarily in flexible foam applications such as upholstery and mattresses.

(ID:43926605)