Oct 11, 2019
Innovative solutions require innovative partners - Automated production of wood-plastic composites
AZO at K 2019 in Düsseldorf hall 9, stand C42
- high plant uptime, designed for continuous operation
- no restrictions when it comes to automating raw materials
- high throughput rate
- robust, high-quality construction
- process and control engineering and after-sales service from a single supplier
Environmental responsibility and recycling technology were among the top priorities when developing the concept and deciding on investment for the manufacture of innovative and award-winning products in the UPM ProFi family of products. Having set themselves the goal of cost leadership, UPM then picked AZO as a partner, with whom continuous optimisation of processes is possible at any point. UPM is a global business with headquarters in Finland and is made up of six business units: Biorefining (biofuels & cellulose), Energy (hydropower plants), Raflatac (label materials), Specialty Papers & Communication Papers and Plywood. UPM Biocomposites’ business is the manufacture of wood-plastic composites. These also include UPM ProFi products. The company is taking the bioindustry and the forestry industry towards a new and sustainable future that is characterised by innovation. The products are manufactured from renewable raw materials and can be recycled.
UPM Biocomposites in Bruchsal, Germany has specialised in the production of wood-plastic composite products. This is where composites made from purely synthetic polymers and wood-based fibres, which occur as surplus by-products during processing and production of self-adhesive label material, are manufactured under the UPM ProFi brand. This low-maintenance, durable material can be used as decking for patios and balconies as well as for garden paths, yachting marinas and jetties.
AZO was tasked with designing reliable feeding of two mixing lines with bulk and medium components and minor quantities. In addition, the finished compounds had to be conveyed and stored in day bins. They were subsequently fed into several extruder lines from these silos. Currently 15 different basic formulations in six colours are produced on the mixing lines.
“From the outset we wanted a concept for the material flow that would not restrict us in any way. Where we are concerned, this means that we are able to transport all components on all mixing and extrusion lines.” Marc Reich, UPM Biocomposites
AZO’s solutions for handling bulk, medium and minor components: AZO FLEXIDOS®
The AZO FLEXIDOS® employed in this plant is extremely versatile. The most popular areas of application are reliable and flexible feeding of extruders and injection moulding machines with new materials, masterbatches, additives and regrind, when requirements are for high-quality products. It is suitable for lower and average rates of throughput.
Pneumatic vacuum conveyors are used to convey medium and minor components to the surge bins for the FLEXIDOS® station. The individualcomponents are metered onto the scales in accordance with the formulation and weighed with a high degree of accuracy. Depending on the use, the main components can be metered in coarse feed, although the remaining components are weighed with gram accuracy and added, depending on the proportion, in coarse and dribble feed.
Advance weighing in the AZO FLEXIDOS® can be carried out in parallel to the weighing of bulk components.
- consistent quality thanks to precise weighing of all components
- traceable formulations with verified composition of the formulation
- unaffected by fluctuations in bulk density
Fully automatic mixer feeding with vacuum weighing systems
Discharge, metering, conveying, combining and weighing – AZO’s vacuum weighing systems are true all-rounders.
Both bulk components and also medium and minor components can be delivered to the mixer using the vacuum weighing systems.
In this case, the components are suctioned, in accordance with the formulation, onto conveying scales with an electromechanical weighing device and weighed with a high degree of accuracy. The core element in the system is the multiport valve, which AZO developed. This makes it possible to have several conveying lines converge at one point. Just before the target weight is reached, the clean-air valve is opened, the conveying line is closed and the multiport valve is suctioned out until it is empty. This means that dribbling is the same for all components. Once all the components are in the conveying scales, the batch is discharged into the mixer.
- reliable mixer feeding
- cost-effective automation
- ideal adaptation to meet required throughput rates and accuracy rates
- systems can be adapted to specific mixer lines exceptionally well
- saves on height and space thanks to horizontal material flow
- flexible system solutions
- closed systems
AZO FLEXIDOS® – consistent product quality by weighing of all components
AZO vacuum weighing systems with conveying scales and multiport valve