06/14/2012 | Autor / Editor: Courteousy of DECHEMA / Dominik Stephan
Biomass – more than just a fuel for power generation: It carries the hope to be usable for an ever–increasing number of chemical intermediates and finished products. At ACHEMA 2012 on June 18th-22nd in Frankfurt am Main, Germany, exhibitors will present techniques for further optimization of biomass conversion. Let's take a look at the challenges that the biomass conversion, bioplastics and renewable feedstock poses for plant engineering...
When asked during an interview with EFCE whether bio-based technologies can replace conventional oil-based technologies, Steen Riisgaard, President and CEO of the Danish firm Novozymes A/S, replied that there is no limit to the possibilities. He said that he does not expect to see an economy totally based on biotechnology any time soon, but he is confident that the chemical industry will take full advantage of the available opportunities.
Biomass and the related markets are in the ascendency, and that is reflected in the investment levels. The Biomass Markets and Technologies study published by Pike Research at the end of 2010 provided data to support this view, and it made the prediction that worldwide investment in the biomass market will continue to grow at a stable rate over the next five years. According to the study, investment will increase from $28.2 billion in 2010 to $33.7 billion in 2015.
Biomass is mankind's oldest source of energy. Wood has kept people warm since time immemorial. The exploitation of biomass as a raw material base is a more recent development. According to the German Chemical Federation (VCI), annual consumption of biomass in the German chemical industry is roughly 2.7 million MT which is about 13 % of the raw material base in the industry. The fossil resources coal, oil and gas used to be cheap, but the attitude in the industry has changed dramatically.
Everybody is talking about the bio–based economy – But what is the truth behind the slogan? How close are developments for the renewable energy, food, animal feed, fine & bulk chemical, textile, printing, machinery manufacturing and IT industries to market introduction? With ACHEMA 2012's special issue BioBasedWorld just ahead, lets take a closer look at the industry, and see if biotechnology and renewables can already deliver solutions to meet the challenges of tomorrow.... More in Bio–Economy: Where Do We Stand?
Biomass covers a broad spectrum both in terms of the source of materials and the end products. The European Biomass Industry Association (EUBIA) has defined four categories of biomass conversion: direct combustion, thermochemical conversion processes (pyrolysis and gasification), biochemical processes (anaerobic digestion, fermentation) and physicochemical (the route to biodiesel). The choice of technology depends on the chemical composition of the raw materials and the target product.
Biorefineries, biobased products, renewable resources, industrial biotechnology — the bio-based economy is not a buzzword, but living reality – and ACHEMA is in on it! See also BiobasedWorld at ACHEMA …a New Format for the Bioeconomy!
Similar to a petrochemical refinery, biorefineries convert biomass to produce a series of chemical raw materials and fuel products. Integrated biorefinery concepts are still in their infancy for the most part, and as a result biorefineries in Germany and the rest of Europe are few and far between. Most are demonstration or pilot plants. Biorefineries operating on a commercial basis tend to be the exception.
This article is protected by copyright. You want to use it for your own purpose? Infos can be found under www.mycontentfactory.de (ID: 34174160) | Fotos: Picture: DECHEMA