German China India

Whitepaper

Developments in Modular Plant Building

| Editor: Alexander Stark

In order to reach the goal of a completely modular designed and built plant, a lot of effort especially regarding the standardization of equipment and automation technology is necessary.
In order to reach the goal of a completely modular designed and built plant, a lot of effort especially regarding the standardization of equipment and automation technology is necessary. (Source: Dechema)

A White Paper Modular Plants, written by the temporary ProcessNet working group, gives an overview on current t and product cycles in the chemical and pharmaceutical industry.

The authors from industry and academia call for a standardization of both nomenclature and equipment in order to enable a broad application of modularization in process engineering. The white paper is currently available in English; a German version will follow.

In the chemical and pharmaceutical industry, individualized products are gaining in importance, resulting in shortened development and product life cycles. Existing production environments can fulfill the increasing flexibility requirements only partly. Modular plants offer the opportunity to design flexible and adaptable processes. In addition, the recyclability of the individual components and the significantly reduced planning effort due to less required engineering are the main advantages of this approach.

Standardization is Key

Research projects such as F3 Factory or the Enpro initiative have shown that the successful application of this kind of process design is viable. Nonetheless, this is a completely new approach. In order to reach the goal of a completely modular designed and built plant, a lot of effort especially regarding the standardization of equipment and automation technology is necessary. At his point, the White Paper "Modular Plants — Flexible chemical production by modularization and standardization — status quo and future trends“ of the temporary ProcessNet working group “Modular plants” comes in. The document was developed in close collaboration of industry and research institutions and reflects the current status of the joint effort for the improvement of the applicability of modularization in plant engineering for the chemical industry. Hurdles and potential development pathways are described and the strengths of modularization are set against its risks. In addition, the required research and funding efforts are identified that are necessary for the further implementation of modular plant concepts.

Comments are being loaded ....

Leave a comment
  1. Avatar
    Avatar
    Edited by at
    Edited by at
    1. Avatar
      Avatar
      Edited by at
      Edited by at

Comments are being loaded ....

Report comment

Kommentar Freigeben

Der untenstehende Text wird an den Kommentator gesendet, falls dieser eine Email-hinterlegt hat.

Freigabe entfernen

Der untenstehende Text wird an den Kommentator gesendet, falls dieser eine Email-hinterlegt hat.

copyright

This article is protected by copyright. You want to use it for your own purpose? Infos can be found under www.mycontentfactory.de (ID: 44517989 / Engineering)